The Plusar Dry multistage submersible pumps are particularly silent running making them ideal for use with pressurisation systems in unventilated rooms or in areas prone to flooding.
Single-piece multi-stage borehole pump with hydraulic assembly positioned under the motor which is cooled by the pumped liquid.
Impellers, diffusers, filter and oil sump in abrasion-proof thermoplastic. Pump liner, stator sleeve, upper head with sleeve and sealing ring in AISI 304 steel.
Upper and lower bearing supports in dezincification-proof pressed brass. Rotor shaft extension in AISI 304. Elastomers in NBR. Stainless steel hardware.
Double mechanical seal separated by an oil chamber, in ceramic/carbon on the motor side and arburundum/carburundum on the pump side. The sealing system ensures the motor remains airtight and the mechanical seal holds even after brief periods of no-water operation.
Continuous service asynchronous submersible motor. Stator incorporated in an AISI 304 stainless steel airtight casing with a cover housing the cables and capacitor.
Rotor mounted on oversized ball bearings to ensure silent running and long life. Incorporated thermal current protection and ermanently connected capacitor in the single-phase version.
Built to IEC 2-3 and IEC 61-69 (EN 60335-2-41).
Protection level of motor: IP 68
Insulation class: F
Standard cables: 20 m of HO7 RN F cable.
The single-phase versions can be supplied with or without floats for automatic operation.
Three-phase protection, a motor overload cut out should be fitted, in accordance with current standards.
- Operating range: from 0,9 to 7,2 m3/h with a head of up to 86 m.
- Pumped liquid: clean, without solid or abrasive substances, not aggressive.
- Max. quantity of sand in water: 50 gr/m3
- Liquid temperature range: from 0°C to +40°C
- Maximum depth of immersion: 20 metres
- Installation: fixed or portable, horizontal or vertical.
- Operation: manual or automatic (continuous operation with pump totally submerged)
- Diameter of delivery connection: 1" 1/4 GAS
- Maximum diameter of pump: 138 mm
These pumps are only avilable in manual versions.
M-NA denotes single phase and T-NA denotes three phase.
Pumps are dispatched direct from Dab Pumps and available normally in 2-3 working days.
buy online with DealsPolo.com