PRICE ON APPLICATION
The SMC6 Multistage semiaxial submersible electric pumps for wells measuring 6 inches or above are able to generate a broad range of flow rates and heads.
They are used extensively for lifting, distribution and pressurisation of industrial water systems, the supply of pressure vessels and tanks, firefighting systems and irrigation systems.
Application with clean, non-aggressive water free from solids or abrasive substances.
Construction features of the pump
Cast iron pump body treated with cataphoresis paint coating and dynamically balanced impellers in microcast AISI 304 stainless steel coupled on the shaft with pull tab. Shaft guided with coaxial bush bearings and fully protected with bushes.
Pump with check valve of low pressure loss.
Threaded delivery port.
Coupling with motors of 4 inch, 6 inch or 8 inch depending on the required hydraulic power:
4GG: encapsulated 4 inch submersible motor
4OL: 4 inch submersible motor in oil bath
6GF: encapsulated 6 inch submersible motor
TR6: rewindable 6 inch submersible motor
TR8: rewindable 8 inch submersible motor
Refer to the technical data sheets of the specific model for the electrical characteristics of the coupled motors and the specifications for operation with inverter.
Operating range: up to 84 m3/h with head up to 452 m.
Pumped liquid: clean, free of solids and abrasives, chemically neutral, with properties similar to water.
Starts/hour: see the coupled motor
Cooling flow: see the coupled motor
Maximum permitted amount of sand: 40 g/m3
Ambient temperature: 30 °C
Minimum recommended level on suction line: 1 m
Installation: horizontal or vertical
buy online with DealsPolo.com