Multifix Self Back Washing Water Softener Iron and Manganese Removal Filters offer an advanced treatment for problematic private water supplies from wells or boreholes.
A simple solution to treat 5 problems: hardness - iron - manganese - natural organic matter - ammonium
The special absorbent media contains 5 key ingredients of various orgin which include 2 patented materials.
The manufacturer boast a success rate of 100% and with up to 10 years service life.
How Does Multifix Work?
The filter is supplied with a bag/s of homogeneous media which distributes into 5 stratas upon the first regeneration. The first layer is a quartz sand which ensures uniform flow across the vessel. The second layer is a cation exchange resin which softens the water. The third layer is HumiSorb which removes natural organic matter and metalorganic impurities (reduces colour and tannins). The fourth layer is FerroSorb which removes iron and manganese compounds. The fifth and final layer removes oxidized iron.
Multifix filters regenerate with the same steps as a normal water softener; backwash, brine, rinse.
|Details||25 Litres||37 Litres||50 Litres||62 Litres||75 Litres||100 Litres||125 Litres||150 Litres|
|Tank Size Inches||10x35||10x54||12x52||13x54||14x65||16x65||18x65||21x60|
|Recommended Service Flow (m3h)||1.0||1.3||1.8||2.2||2.5||3.3||4.2||5.5|
|Volume Capacity between regen @300 ppm (m3)||2.86||4.00||5.66||7.00||8.66||11.66||14.5||17.33|
|Brine Tank Volume Litres||85||95||95||140||140||190||340||460|
|Regen Duration minutes||75||75||8||80||75||75||80||80|
|Footprint DxWxH cm||38x66x109||40x68x157||42x70x152||58x90x157||38x66x109||40x68x157||42x70x152||58x90x157|
The manufacturer recommends installing a sediment pre-filter before the Multifix unit and a post carbon filter after the Multifix unit for the absorption of any Hydrogen Sulfide odours. These will need to be ordered separately
For further detailed information please contact us and we would be pleased to assist with selection of the appropriate sized filter.
Please note that these filters are supplied with the required quantity of filter media in sealed bags and that assembly of the unit will be necessary. We offer an installation service so please contact us for prices.
We would always recommend that a water analysis is carried out to dertermine the level of iron and manganese present. This way we will be able to offer the most efficient type of filter for the effective treatment of iron and manganese. If the level of Iron is excessively high then a Shakesby Iron Removal Filter may be your best option.
buy online with DealsPolo.com