We are very aware that for gardeners installing a pop up system is not a frequent event and all the information and instructions can appear confusing.  

In our many years of experience we know that most gardeners are more than capable of installing a pop up system and if the lawn is undertaking renovations to the grass then now is the best time to install a system.

 

We do offer our planning service where we will work out your lawn irrigation requirements but for those keen to get on the with the task we offer our kits that should contain all you need to get you going and with our unique offer of you being able to swop any sprinklers or fittings that you do not require for ones that you do, by following our instructions you will soon have your system installed.

All kits are easy to automate. Click here for more information 

Rotator kits.

These rotator nozzles on Toro 4” bodies are very popular for lawn irrigation and have become an industry standard due to their high uniformity, low water use and “matched precipitation” (ability to mix and match different nozzles and arcs whilst maintaining the same quantity of water applied to each square metre over the whole lawn).

The Rotator nozzles come in three varieties the 360° all round nozzle, the 90° to 210° for corners and edges, and for wide arcs 210° to 270°.    The kits come with the Rotator 2000 which gives a throw of 3.5m to 6.5m. Should you wish to alter the mix of nozzles as you order you are more than welcome. The Rotator 1000 will throw 2.5m to 4.7m and the Rotator 3000 7.6m to 9.1m. The Rotator 3000 will use considerably more water per nozzle so to allow for this you may have to split your lawn into several zones.

 

 

Kit 1   5 x Rotator with Toro 4” bodies

 This, from a good water supply, you should be able to water all at once as a single zone. This pop up kit will enable a lawn of about 220 square metres to be irrigated.

Kit consist of

5 x Toro 4” pop ups                          (SPB4)

2 x Rotator 2000 360° nozzles          (SPS20)

3 x Rotator 2000 90°-210° nozzles   (SPS21)

5 x Take offs with hose connections   (CF1510)

1 x 20mm compression T                   (CF1010)

1 x 20mm compression connector      (CF3310)

2 x 20mm compression end caps       (CF3710)

1 x 20mm to hose adaptor                 (CF3710)

1 x auto drain with saddle                  (AUT)   

1 x 50m 20mm PE Tube                    (T2050)

 

 

Kit 2 10 x Rotators with Toro Bodies

This, from a good water supply, will be have to be operated as 3 zones. This pop up kit will enable a lawn of about 600 square metres to be irrigated.

Kit consist of

 

 

These Toro pop-up Mini 8 are a very flexible gear driven sprinkler  with an arc adjustment of 45° - 360° and a throw of 6 to 10.5m.

Very easy to set up and one sprinkler will do all the options. Comes complete with 5 nozzles.

Click here for full specification of Toro Mini 8

 

Kit 3   5 x Toro Mini 8 gear driven  

This, from a good water supply, you should be able to water all at once as a single zone if using the smaller nozzles if using the larger nozzles for maximum throw suggest area split into 2 zones. This pop up kit will enable a lawn of up to 600 square metres to be irrigated.

Kit consist of

5 x Toro Mini 8 pop ups                           (SPTM8)

5 x Take offs with hose connections          (CF1510)

1 x 20mm compression T                          (CF1010)

1 x 20mm compression connector            (CF3310)

2 x 20mm compression end caps             (CF3710)

2 x 20mm to hose adaptor                       (CF3710)

2 x auto drain with saddle                       (AUT)   

1 x 50m 20mm PE Tube                        (T2050)

 

 

Kit 4   10 x Toro Mini 8 gear driven

This, from a good water supply, will be have to be operated as 3 zones or 4 with the larger nozzle. This pop up kit will enable a lawn of about 1300  square metres to be irrigated.

Kit consist of

10 x Toro Mini 8 pop ups                      (SPTM8)

10 x Take offs with hose connections     (CF1510)

2 x 20mm compression T                       (CF1010)

2 x 20mm compression connector          (CF3310)

5 x 20mm compression end caps            (CF3710)

4 x 20mm to hose adaptor                     (CF3710)

4 x auto drain with saddle                      (AUT)  

1 x 100m 20mm PE Tube                     (T20100)

 

 

Claber Colibri-

This exclusive gear driven turbine with jet intercepting head.  Colibri sprinklers distribute a fine even spray optimizing irrigation of lawns with limited water consumption.

The Colibri kit has everything that is required to water a small garden up to 50msq and combined with a Claber Duplo timer should make sure that there is adequate pressure to make sure the optimum performance is achieved.

 

To purchase Colibri Kit Click here